Soft Film Ceiling 12V/24V 1w/led Led Roller Strip for Built-in backdrops, backlit light boxes

The LED Roller Strip is a special kind of LED light. It is used to light up advertising light boxes.This new kind of lighting has LED light strips. The strips are made of wires arranged in parallel. Its design is similar to that of blinds, which is why it has other names, such as roller shutter light, curtain light, or grille light. The standard lengths of roller shutter light strips are 50 centimeters (6 LEDs/pc), 90 centimeters (12 LEDs/pc), 100 centimeters (14-16 LEDs/pc), and 120 centimeters (18-24 LEDs/pc). Each roll-up light strip contains 20 to 40 light strips. The main advantage of this light box is that you can adjust the spacing of the light strips based on how thick the light box is. A parallel circuit ensures that there is no voltage drop, that it can be installed quickly, and that it is high-efficiency lighting.LED roller strips have become the main type of light source for advertising light boxes. Its design is made of separate parts, it saves energy and is good for the environment, and it can easily be adjusted to different settings. These features make it a popular choice.

The LED Roller Strip features a thickened aluminum substrate bottoming, waterproof and flame retardant ABS bottom groove, acrylic material covering, diffuse reflective lamp bead design, and high-brightness brand lamp beads (Coretronic chip, OSRAM chip, Epistar chip, etc.). It is also equipped with pure copper connecting wire.We have 6leds/pc, 12leds/pc, 20leds/pc for your choice. They are mainly used in outdoor patio lighting, landscape lighting, built into indoor and outdoor escalators or outdoor patio lighting, bedroom, bar lighting decoration, etc.

Specification:

Features:

1. Low voltage, safe LED strip. DC12V/24V;

2. Aluminum PCB dissipate heat quickly;

3. Patent-design connect,wire length is adjustable;

4. Diffuse reflection design: (1)The lamp bead features a PMMA optical lens with a nano-diffuse reflection coating that scatters light into a 175-degree wide-angle beam. This innovative feature addresses the challenges of uneven illumination and high energy consumption typically associated with traditional lighting solutions. 

                                              (2) It also prevents glare and eliminates the direct light spot of traditional light beads, ensuring a uniform brightness in advertisements and preventing visual fatigue among audience customers.

   
   

   

5. The roller strip utilizes a "parallel circuit + curtain layout," similar to blinds, offering flexible spacing to accommodate varying thicknesses of the light box.

6. Cut length: 1 led unit(12V); 2 leds unit(24V).

                    (1) Cuttable design allows customers to adjust the length freely according to the size of the actual light box or display area, reducing the waste of edges; 

                    (2) the cuttable design make strips does not require complex wiring, and can be fixed directly with magnetic suction and adhesive backing; 

                    (3) if part of the roller strip out of the line is damaged, it does not need to be disassembled as a whole to replace it, reducing the cost and time of maintenance. 

   This design is designed for irregularly shaped advertising lighting fixtures.

7. Usually the index is greater than 85, closer to the original color of the lighting objects, the color is more vivid.

8. Multiple colors to choose from: Warm white (2700-3500k), Positive white (4000-5000k), Cool white (6000-10000k), Red, Orange, Yellow, Green, Blue, Purple, Pink, Lemon Yellow, Ice Blue and Pinkish and more;

9. Low power, high luminous efficiency (100lm/w-180lm/w), even illumination, energy saving;

10. Easy to install and store, with 3M self-adhesive tape or magnetic suction;

11. Can be used and stored at temperatures from -40 ℃to 60℃, with a service life of more than 50,000 hours;

12. Protection level: indoor IP20, outdoor IP65-IP68.

Applications:

1. Sign light boxes,Double-side signboard Stairway and walkway lighting, Internally lighted billboards, indoor or outdoor sign cabinets;

2. 3cm-8cm [5.51~15.75in] depth double-sided and 8~20cm [3.15~7.87in] depth single-sided edge lighting light boxes;

3. General lighting, task lighting, household appliances, architectural lighting,Bar Top Lighting;Accent Lighting;Club Lighting;TV back Lighting, villa, restaurant, hotel, meeting room, show room, shop, counter.

Installation:

1. Ensure that the correct DC voltage is supplied and distinguish between positive and negative; in general, the gray (red) wire is positive and the white (black) is negative.

2. Avoid short circuits by following the above connections.

3. Make sure the wires are securely connected. It can be pulled by hand and not moved.

4. Do waterproof treatment and anti-corrosion treatment before wiring.

5. Make sure the connection and installation are good before turning on the light.

6. Do not use chemical solvents in the environment.

7. Close the box for up to 4 hours when fixing with neutral glass adhesive.

8. Connect the end of the wire to the mains cable and ensure that it is treated against water and corrosion.

9. If you want long wires, use 18AWG wire.

FAQ

1.Can I have a sample for test?

Yes, samples are available. We will offer the sample of LED roller strip light for 1 to 20 pcs, and the sample could provide for customer with free, but the freight will be covered by customer account. The sample freight will be returned to customer account after our cooperation.

2.How about the lead time?

Usually we had material in stock, regular order delivery time 1--5 days after the order (Pl) paid. Custom products 8--15 days(Custom PCB).

3.How do you ship the goods and how long does it take to arrive?

We usually ship by DHL, UPS, FedEx. It usually takes 3-7 days to arrive. Airline and sea shipping are also optional.

4.Do you accept OEM service?

Yes, we accept OEM order. we will produce the products as your requirement.

5.ls it Ok to print my logo on product and package?

Yes, it is OK. Before our production, please inform us formally, and confirm the design firstly based on the sample that we send to you.

6.Do you accept the third party inspection?

Yes absolutely we accept.

7.How to precede an order for led roller strip light?

Firstly let us know your requirements or application. 

Secondly we quote according to your requirements or our suggestions. 

Thirdly customer confirms the samples and places deposit for formal order. 

Fourthly we arrange the production once the payment received. 

Finally, once finish production, we will arrange shipment and send the track Number with no delay.

8.How much tax should I pay for custom when we buy goods from you?

Different country had different import policy: you need to figure out with Custom, We don't have a exact answer about this. but most of country 25% on the invoice value.

9.What after-sale services does your factory offer?

Our factory offers free technical support, and we will provide replacement and refund service if any product problem.