Double-sided lightboxes AC110V AC220V 2835 2w/led SMD3030 Led Roller Strip for Built-in backdrops, backlighting light boxes

The 220V diffuse roller strip features a parallel design, facilitating rapid wiring through the main line connection line, which reduces installation time by more than 50%. This product is particularly well-suited for projects with stringent construction schedules. It can be directly connected to the AC power source without the need for additional power adapters, thereby reducing the power conversion link. It is also equipped with a constant current driver to ensure stable current operation. This approach not only reduces the cost of accessories, but also eliminates the risk of maintenance issues caused by power outages. In large light boxes (such as outdoor billboards), 220V diffuse light bars reduce the current through high voltage, thereby significantly reducing the impact of voltage drop and ensuring uniform brightness throughout the light box.

The LED roller strip utilizes a thickened aluminum substrate and aluminum profile coating, a PMMA lens, and a nano-level refractive layer. It is equipped with high-brightness brand lamp beads (CREE chip, OSRAM chip, Epistar chip, etc.). Additionally, it is equipped with pure copper connecting wire. We offer three options for quantity: 6leds/pc, 12leds/pc, and 20leds/pc.

Why choose 220V LED roller strips?

1. Installation complexity and efficiency issues

Traditional low-voltage light strips need to be wired and powered independently, which is cumbersome to operate.

220V rolling light strips adopt a parallel design, which can quickly complete the wiring through the main line connection line, reducing the installation time by more than 50%, especially suitable for projects with tight schedules.

2. Outdoor high-brightness requirements

220V rolling light strips have higher power (60-100W per square meter) and a brightness of 4000-5800LUX, far exceeding low-voltage light strips. Suitable for scenes such as subway stations and shopping mall exteriors that require strong light to attract attention. For example, outdoor advertising light boxes often use 220V rolling light strips with SMD5730 high-brightness lamp beads to ensure visibility during the day.

3. Space and maintenance limitations

In narrow or sealed light boxes (such as blister light boxes), additional power supplies take up space and are difficult to dissipate heat. 

220V rolling light strips do not require power, saving space and reducing the risk of overheating. During maintenance, only the light strip itself needs to be checked, without checking the power module, and fault location is faster.

Specification:

Features:

1. Adopts a parallel design and can be directly connected to the AC power without the need for an additional power adapter, which reduces the power conversion link;

2. Equipped with a constant current driver to make the current operation more stable;

   
   

   

   

3. Aluminum plate+Aluminum profile dissipate heat quickly;

4. Patent-design connect,wire length is adjustable;

5. Wide-angle lens design: 

   

   (1)The lamp bead features a PMMA optical lens with a nano-diffuse reflection make the lighting distance reach 3-5 meters, suitable for extra-long and extra-large light boxes, uniform lighting, no "rib pattern" phenomenon; 

   (2)This innovative feature addresses the challenges of uneven illumination and high energy consumption typically associated with traditional lighting solutions. 

   (3) It also prevents glare and eliminates the direct light spot of traditional light beads, ensuring a uniform brightness in advertisements and preventing visual fatigue among audience customers.

6. The roller strip utilizes a "parallel circuit + curtain layout," similar to blinds, offering flexible spacing to accommodate varying thicknesses of the light box.

7. Cut length: 2 leds unit.

                    (1) Cuttable design allows customers to adjust the length freely according to the size of the actual light box or display area, reducing the waste of edges; 

                    (2) the cuttable design make strips does not require complex wiring, and can be fixed directly with magnetic suction and adhesive backing; 

                    (3) if part of the roller strip out of the line is damaged, it does not need to be disassembled as a whole to replace it, reducing the cost and time of maintenance. 

   This design is designed for irregularly shaped advertising lighting fixtures.

8. Usually the index is greater than 85, closer to the original color of the lighting objects, the color is more vivid.

9. Multiple colors to choose from: Warm white (2700-3500k), Positive white (4000-5000k), Cool white (6000-10000k), Red, Orange, Yellow, Green, Blue, Purple, Pink, Lemon Yellow, Ice Blue and Pinkish and more;

10. Low power, high luminous efficiency (100lm/w-180lm/w), even illumination, energy saving;

11. Easy to install and store, Easy installation by screw, you can replace the failure LED easily.;

12. Can be used and stored at temperatures from -40 ℃to 60℃, with a service life of more than 50,000 hours;

13. Protection level: indoor IP20, outdoor IP65-IP68.

Applications:

1. Sign light boxes,Double-side signboard Stairway and walkway lighting, Internally lighted billboards, indoor or outdoor sign cabinets;

2. Suitable for a depth of 14~40cm [5.51~15.75 inches] double-sided and 8~20cm [3.15~7.87 inches] single-sided edge lighting light boxes;

3. General lighting, task lighting, household appliances, architectural lighting,Bar Top Lighting;Accent Lighting;Club Lighting;TV back Lighting, villa, restaurant, hotel, meeting room, show room, shop, counter.

Installation:

1. Ensure that the correct AC voltage is supplied and distinguish between positive and negative; in general, the gray (red) wire is positive and the white (black) is negative.

2. Avoid short circuits by following the above connections.

3.It is essential that this product be installed and serviced by a qualified, licensed electrician.

4. Do waterproof treatment and anti-corrosion treatment before wiring.

5. Make sure the connection and installation are good before turning on the light.

6. Do not use chemical solvents in the environment.

7. It is imperative that the LED module and its components not be subjected to mechanical stress.

8. It is imperative that the conductive paths on the circuit board remain undamaged during the assembly process. To ensure safe operation, it is imperative to utilize an electronically stabilized power supply to avert short circuits, overloads, and overheating.

9. Please take a moment to review the standard ESD precautions that should be observed during the installation process.

10.Please verify that the power supply has sufficient capacity to support the total load.

FAQ

1.Can I have a sample for test?

Yes, samples are available. We will offer the sample of LED roller strip light for 1 to 20 pcs, and the sample could provide for customer with free, but the freight will be covered by customer account. The sample freight will be returned to customer account after our cooperation.

2.How about the lead time?

Usually we had material in stock, regular order delivery time 1--5 days after the order (Pl) paid. Custom products 8--15 days(Custom PCB).

3.How do you ship the goods and how long does it take to arrive?

We usually ship by DHL, UPS, FedEx. It usually takes 3-7 days to arrive. Airline and sea shipping are also optional.

4.Do you accept OEM service?

Yes, we accept OEM order. we will produce the products as your requirement.

5.ls it Ok to print my logo on product and package?

Yes, it is OK. Before our production, please inform us formally, and confirm the design firstly based on the sample that we send to you.

6.Do you accept the third party inspection?

Yes absolutely we accept.

7.How to precede an order for led roller strip light?

Firstly let us know your requirements or application. 

Secondly we quote according to your requirements or our suggestions. 

Thirdly customer confirms the samples and places deposit for formal order. 

Fourthly we arrange the production once the payment received. 

Finally, once finish production, we will arrange shipment and send the track Number with no delay.

8.How much tax should I pay for custom when we buy goods from you?

Different country had different import policy: you need to figure out with Custom, We don't have a exact answer about this. but most of country 25% on the invoice value.

9.What after-sale services does your factory offer?

Our factory offers free technical support, and we will provide replacement and refund service if any product problem.